Psyche 417 Posted January 21 Share Posted January 21 For the keen DIY'er with plenty of time you could probably 3-D print a mould and cast your own in bronze 1 Quote Link to post Share on other sites
waikiore 277 Posted January 23 Share Posted January 23 Some Yanmar YM ones have been done locally... not cheap but permanent Quote Link to post Share on other sites
BMW56 12 Posted January 26 Share Posted January 26 I built a new exhaust manifold and mixer from stainless 2 years ago. I made a template from PVC water pipe first then fabricated from off the shelf bends. Worked out well and no issues so far. Bends and tube from Steel & Tube Stainless. Price was reasonable and their rep was very helpful. Had a mate help with welding. Only downside was the time it took but I had no other option as the old manifold was badly corroded and no original replacement available. 2 Quote Link to post Share on other sites
aardvarkash10 797 Posted Friday at 04:39 AM Share Posted Friday at 04:39 AM 7 hours ago, BMW56 said: I built a new exhaust manifold and mixer from stainless 2 years ago. I made a template from PVC water pipe first then fabricated from off the shelf bends. Worked out well and no issues so far. Bends and tube from Steel & Tube Stainless. Price was reasonable and their rep was very helpful. Had a mate help with welding. Only downside was the time it took but I had no other option as the old manifold was badly corroded and no original replacement available. looks like the donor parts formed the majority of a milking machine manifold! 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.