Guest Posted June 25, 2011 Share Posted June 25, 2011 That was an excellent reply, on the strength of that I would have some faith in whoever it was. I concur. Very well said Phil. Link to post Share on other sites
k88 7 Posted June 25, 2011 Share Posted June 25, 2011 Anyone can advise on rod riggings? Does it last longer? When you replace the riggings I guess u need to replace all the tangs, toggles and rigging screws etc, otherwise u still have weak link in the system. Link to post Share on other sites
Gappy 9 Posted June 25, 2011 Share Posted June 25, 2011 Rod rigging is once again very subjective to what sort of use it has had etc. I currently have two rre rigs on rod at work both have broken D's and both were put together dry which is just dumb and one would be 20yrs old and the other about 5-8yrs old. If you want to discuss further about rod drop me a PM its really depends on brand, the type of fittings etc Cheers Link to post Share on other sites
wheels 543 Posted June 25, 2011 Share Posted June 25, 2011 About the best...for longevity that is...rigging is Galv. But you still have Chainplates, Turnbuckles and mast termination fitttings in the equation. Link to post Share on other sites
Steve Pope 243 Posted June 25, 2011 Share Posted June 25, 2011 I second that Allan, you still need a reputable brand/ manufacturer though Link to post Share on other sites
wheels 543 Posted June 26, 2011 Share Posted June 26, 2011 Or reworded slightly, Non-Chinese Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.