Leaderboard

Yes I am willing to try it myself but I don't have a bearing press, and so think I would have to resort to primitive procedures - like a f...ing big hammer to remove the bearings . I have yootube too, and of course it looks simple enough. D2 has a mechanical boyfriend so I think I will get his help and do it under supervision

I commissioned (fitted) a Raymarine element 9HV recently which dropped its position randomly but quite frequently. We resolved by reducing the resolution of its position output. It was a setting well hidden and I am not sure if it looked at less satellites or used a less intensive algorithm but this worked and may give you a lead. Had earlier tried to reducing the plot to 5 second separation and problem remained, after reducing resolution it now also accepts 1 second plot separation happily. Brien

Just came across this thread as I have been running a Raspberry Pi, OpenCPN based chartplotter solution for the last year on my Young 88 and have a couple of issues so thought I'd reach out and share my experience. Firstly great job on your build aardvarkash10, you say you're not a geek but you've done a great job adding all those hardware components like UPS and power converters. I am a geek in that software and Linux is familiear teritory. In saying that my aim was to keep the build as simple as possible and do as little coding as possible which I've pretty much achieved. My buil