funlovincriminal 212 Posted October 13, 2015 Share Posted October 13, 2015 Anyone got lying around a little piece of carbon tube for making a bobstay hole through the knuckle of my 830? I know I could get something sent from Kilwell but we are talking a little offcut...anything with an id of 15-25mm and a max length of 100mm. Cheers! Link to post Share on other sites
erice 732 Posted October 16, 2015 Share Posted October 16, 2015 i've got something black that seems more like a frp broom handle than anything else, not light enough to be carbon...... you're welcome to 300?mm of that if nothing better turns up Link to post Share on other sites
SloopJohnB 326 Posted October 16, 2015 Share Posted October 16, 2015 There was a place on the shore that made fishing rods, used them for masts in small rc boats also you could try Nick at Evolution Composites in Beach Haven but I think he starts at 19/20 id. Link to post Share on other sites
B00B00 322 Posted October 16, 2015 Share Posted October 16, 2015 If you get desperate I will have a look around the loft. We have heaps of carbon batten off cuts but they are not round. Link to post Share on other sites
Vorpal Blade 89 Posted October 18, 2015 Share Posted October 18, 2015 Ive rescued a few bits from the rubbish pile that accumulated over the weekend, you chose - 30mm ID x 4mm wall x 175mm long 25mm ID x 2mm wall x 359mm long 15mm ID x 3mm wall x 300mm long make it quick as its heading for the tip early next week. Link to post Share on other sites
funlovincriminal 212 Posted October 18, 2015 Author Share Posted October 18, 2015 Sweet thanks everyone VB I'll grab that 15mm ID one off you. I'll give you a call Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.