Jump to content

LL4 Dynice

Recommended Posts

For a multi story we've done Catknapp about 3 years ago now in unsheathed dynice dux sourced from Hampijan in Nelson for around $11/m for 9mm stuff. We spec'ed for creep rather than break load as the boat would have had 3mm!


We got some rather nice 316 closed eye thimbles from a crowd in the AU which worked well for a Wharram. Spliced ends ourselves and did 1 extra which we got tested, 9mm is meant to be a tad under 9t break, With our eyes we tested brake at 8.3t. 3 years on and it's held up very well.


If tension and creep are a concern for your rig tho I'd still stick with SS unless you like to fiddle

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...