smithy09 50 Posted April 28, 2013 Share Posted April 28, 2013 http://forums.sailinganarchy.com/index.php?showtopic=126442 Unbelievable!! A must read post on Sailing Anarchy... Link to post Share on other sites
banaari 27 Posted April 28, 2013 Share Posted April 28, 2013 Looking on the bright side, whatever's gonna happen to it will happen long before it gets near our SAR zone. Link to post Share on other sites
smithy09 50 Posted April 28, 2013 Author Share Posted April 28, 2013 Looking on the bright side, whatever's gonna happen to it will happen long before it gets near our SAR zone. I would say long before he reaches the harbour. You have to admire his persistence and application though! Link to post Share on other sites
Guest Posted April 29, 2013 Share Posted April 29, 2013 A brilliant idea and I want one. Just so happens I have the plans for one very similar. Now just need less other crap in my life happening to get started on it. Link to post Share on other sites
John B 106 Posted April 29, 2013 Share Posted April 29, 2013 Yeah but its must see viewing eh. Like Raw Faith, and that Absolute 80 that couldn't get off the ways until it had the sponsons welded on Link to post Share on other sites
Guest Posted April 29, 2013 Share Posted April 29, 2013 Nah, excellent anarchy, go the hotrod Link to post Share on other sites
Guest Posted April 29, 2013 Share Posted April 29, 2013 This thing is going to smoke! is it floating yet? Link to post Share on other sites
smithy09 50 Posted April 29, 2013 Author Share Posted April 29, 2013 I havent seen the anarchy thread but elsewhere on the net, theres debate over whether its a serious boat of just a floating bach with a few yott things chucked on to fly under the local legislation. Whats really amazing is the amount of schadenfreude this project seems to generate. I'd read the thread before giving them a too hard a time for taking the piss. The thing is made of 4 x 2 pine and non marine ply. Glassed on the outside and epoxy coated on the inside. The cross beams are held in with coach bolts.. And on it goes. If it can handle the stress of floating it will be doing well, let alone a tow, or a seaway.. The hotrod is some man!! Link to post Share on other sites
wheels 543 Posted April 29, 2013 Share Posted April 29, 2013 I bet his Profession is a House Builder. I have seen it far too many times (2) before. One guy I know has built a 40ft Vindex with two Deck up flybridge using a 30ft Hull and used 3x2, "No more Nails" as Glue and his Builders gas powered nail gun. Add to that, he has installed 600Ltr fuel tank and 800ltr of fresh water. But don't worry, he has upped the Hp from 130 to 180Hp. Link to post Share on other sites
raz88 96 Posted April 29, 2013 Share Posted April 29, 2013 Yep - I read the thread and I'm pretty sure it said somewhere he was a house builder. It definitely refers to him as a master craftsman in some of the early newspaper article links... From the fact that he had to wire the hulls to the beam supporting the mast because they started to fall off when he tried to jack it onto his trailer, it sounds like they're right that it's going to fall apart during launch or very soon after. I'm just gutted I didn't know about it to go and see it when I was there a few months back! Link to post Share on other sites
ab1974 1 Posted April 30, 2013 Share Posted April 30, 2013 Ouch, that's a lot of time and money to spend on something that looks suitable only as a houseboat tied up to a mooring on a lake. Just can't see how that will work structurally - the loads would be huge and not something 2x4 timbers braced with coach bolts could ever support. Link to post Share on other sites
wheels 543 Posted April 30, 2013 Share Posted April 30, 2013 Where is this Boat?? Link to post Share on other sites
Grinna 2 Posted May 1, 2013 Share Posted May 1, 2013 It appears to be very ........ angular. Link to post Share on other sites
Guest Posted May 1, 2013 Share Posted May 1, 2013 You didn't know there was a Cubist school of naval architecture? Link to post Share on other sites
wheels 543 Posted May 1, 2013 Share Posted May 1, 2013 I have a good friend that lives at Moss Landing. I will let him know about this. He might like to go take a look and have a chuckle. Link to post Share on other sites
banaari 27 Posted May 1, 2013 Share Posted May 1, 2013 I have a good friend that lives at Moss Landing. I will let him know about this. He might like to go take a look and have a chuckle. I'm starting to feel a smidgen sorry for the poor bastard. Would probably be MORE sorry if he wasn't ignoring the advice he's doubtless been getting from all quarters. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.