WANTED paddle wheel

[snail 1]

Hi, does anyone have, or know when I can get a paddle wheel for a Navman 3100s log? Ours got blown off by the last water blasting (there's a lesson for me!) Thanks

[eruptn 105]

I'm sure i have one.

[Island Time 1,294]

or Try Navico - they still have some spares...  08004628426

[Guest fng]

I'll have a look in my box of sh*t - I know there is some gauges - there may well be the other end as well

[harrytom 697]

I got the last 2 wheels from Absolute marine about 2 yr ago and now down too no spare as above,water blaster

[Farrari 4]

I got the last 2 wheels from Absolute marine about 2 yr ago and now down too no spare as above,water blaster

 

From memory the Absolute Marine ones were an after market version, not that it mattered.  I tried to buy a couple about two years ago and was told the last two had been sold the week prior.  From memory the ones listed at Navico were transom mounted, not thru hull.  I have heard of someone modifying another brand of paddlewheel so that might be an option.

[eruptn 105]

Ok had a look in the spares bin .. here is the one I have:

[eruptn 105]

Sorry picture didn't appear .... ?

 

Error 500 ...

 

Made file smaller seams to help.

[ballystick 79]

Hi Eruptn, my paddle wheel has just lost one of it's magnets so only reads half speed. Mine is smaller than the usual, what is the diameter?

[harrytom 697]

Ok had a look in the spares bin .. here is the one I have:

same wheels I brought,just had to calibrate navman with gps,checked with another boat and works fine,next 1 wreck will be looking at replacing whole unit

[eruptn 105]

A slight, no serious oh bugger moment, went to measure it and it turned into two parts .... the wheel just split in two as i placed it in the calipers to measure it.

It was 28 mm just for the record. 

[vic008 17]

Hi, I also need the paddlewheel and holder (the wires are chewed thru really close to where they exit) so if anybody found they did have the unit, much appreciated.