bigal.nz 60 Posted April 3, 2020 Share Posted April 3, 2020 We were looking at Vinyl lettering on our transom, the camber of the transom is such that it faces the sun (there is probably a term for that) - but anyway the point is the sign writer said that in NZ UV the lettering would not last long, and needed to be on a vertical, or past vertical surface. Anyone else heard this, or have experience to the contrary? Quote Link to post Share on other sites
eruptn 103 Posted April 3, 2020 Share Posted April 3, 2020 Did our boat 3 yrs ago, both sides.. not noticed anything as yet. Quote Link to post Share on other sites
tuffyluffy 76 Posted April 5, 2020 Share Posted April 5, 2020 I had my boat sign-written with Vinyl lettering about 10 years ago - its still lookin great. My counter stern faces north in the marina and cops the sun all day. Dark blue lettering on silver/grey. Quote Link to post Share on other sites
bigal.nz 60 Posted April 5, 2020 Author Share Posted April 5, 2020 13 minutes ago, tuffyluffy said: I had my boat sign-written with Vinyl lettering about 10 years ago - its still lookin great. My counter stern faces north in the marina and cops the sun all day. Dark blue lettering on silver/grey. Ahhh - good to know. Thanks Quote Link to post Share on other sites
Dagwood 69 Posted April 10, 2020 Share Posted April 10, 2020 Yeap, been a few years now but I was involved in the distribution of these films. I'm assuming you're looking at lettering cut from coloured vinyl as opposed to something being printed on white or clear vinyl. High performance films were made from cast vinyl as opposed to calendered vinyl. Quite a different manufacturing technique and gave a film that was thinner, more flexible and more resistant to shrinkage. It's true that the life expectancy ratings are based on a vertical surface but even so you should be fine with a good quality high performance cast vinyl. Over 90% of the boat names out there would be vinyl - either computer cut or digitally printed. When was the last time you saw an old hand doing lettering with a brush at a hardstand? Quote Link to post Share on other sites
bigal.nz 60 Posted April 11, 2020 Author Share Posted April 11, 2020 1 hour ago, Dagwood said: Yeap, been a few years now but I was involved in the distribution of these films. I'm assuming you're looking at lettering cut from coloured vinyl as opposed to something being printed on white or clear vinyl. High performance films were made from cast vinyl as opposed to calendered vinyl. Quite a different manufacturing technique and gave a film that was thinner, more flexible and more resistant to shrinkage. It's true that the life expectancy ratings are based on a vertical surface but even so you should be fine with a good quality high performance cast vinyl. Over 90% of the boat names out there would be vinyl - either computer cut or digitally printed. When was the last time you saw an old hand doing lettering with a brush at a hardstand? Dagwood - thanks for your insights, sounds like you have been in the industry. I finally found the correct word for what we have - a reverse counter transom. Do you care to reccomend anyone? Someone out East Auckland would be great. Cheers, Quote Link to post Share on other sites
Dagwood 69 Posted April 11, 2020 Share Posted April 11, 2020 Message sent... Quote Link to post Share on other sites
Black Panther 1,745 Posted April 11, 2020 Share Posted April 11, 2020 Also known as a retroussè transom Quote Link to post Share on other sites
Neil 35 Posted April 15, 2020 Share Posted April 15, 2020 Ours was done in 2001 and even though I don't own the boat anymore the signage is still top notch (on both sides). Got a good price on the shade of blue as it was "Foodtown Blue" and they just happened to have a lot in stock at the time Happy to see the signage has outlasted the supermarket brand. Quote Link to post Share on other sites
Cameron 93 Posted April 17, 2020 Share Posted April 17, 2020 The solid colour vinyl lasts ages if you get quality stuff.... It's the printed ones with colour changes / fades etc that don't last all that well Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.