banaari 27 Posted February 19, 2013 Author Share Posted February 19, 2013 Finally managed to get enough of a weekend, and the help and mentoring of a Very Good Friend Indeed to get the wee beast out of the water and antifouled. What finally went back in is something of an improvement. Discovered along the way that at some time in the past she's been repaired in the area just forward of the port keel. The original bolts are placed head-up, and threaded into the keel metal. The replacements were installed head-down... those heads had mostly corroded away leaving that keel less than perfectly attached to the hull and the transverse girders within. Brief rant here: Given the bolts are kind of critical to the structure WHY would you render the inside ends inaccessible by glassing furniture over the top? The previous repairer had been forced to cut himself an access hand-hole; *I* was forced to tighten the nuts 1/6th of a turn at a time. Gaaargh. Pending hauling her out and parking her at home over next winter for a complete repaint (and osmosis fix, and, and...), we've deviously raised the waterline about 4 inches... that and the boot topping effectively fix the worst of the mess. Might now be able to update my avatar to a photo taken in the light of day Link to post Share on other sites
Bimini Babe 0 Posted February 20, 2013 Share Posted February 20, 2013 leaving that keel less than perfectly attached to the hull You've got two of them - what are you worried about? Link to post Share on other sites
Brooker 0 Posted February 20, 2013 Share Posted February 20, 2013 Cool story thanks mate, she looks very pretty sitting in that berth now. I am sure that you will have a heap of fun on board And don't worry I would say every crew.org member has had most of that happen to them at some time with their boats............. Link to post Share on other sites
erice 732 Posted February 20, 2013 Share Posted February 20, 2013 excellent reading for noobs please continue the writing Link to post Share on other sites
banaari 27 Posted March 30, 2013 Author Share Posted March 30, 2013 Am very pleased to report that the love object is finally clear of Westhaven. We're currently parked at the end of Whangaparaoa, next stop Kawau. Link to post Share on other sites
banaari 27 Posted April 1, 2013 Author Share Posted April 1, 2013 Most of the way across Bream Bay to Marsden Cove. The love object is officially in Northland.... saw first flying fish, wow Link to post Share on other sites
SMU's Crew 4 Posted April 2, 2013 Share Posted April 2, 2013 So where did you get to today Banaari? Link to post Share on other sites
banaari 27 Posted April 2, 2013 Author Share Posted April 2, 2013 Today we spent holed up in Marsden Cove, getting the rudder seen to. Several miles south of Kawau on Sunday, the lower pintle pin fractured where welded to the tang. We were able to make South Cove using the directional abilities of the outboard, and there employ a spare shackle to jury rig the lower linkage, before moseying up to North Cove for the night. The drive (no usable wind to speak of) to Marsden Point from Cape Rodney was the first time I've had the fun of setting course for a destination not actually visible over the horizon. Quite unnerving at first but by god I want more of it :) Glassy seas and sun all the way. Totally ommitted to take the tide into account and had a hell of a slog up the Whangarei channel against the current. Dropped the rudder off this morning, and then rented a car and scuttled into Whangarei to get a few non-critical but nice-to-have provisions. Including an electric galley pump... the current hand operated unit is more or less useless, and leaks. Expecting to spend Thursday holed up in Tutukaka. Link to post Share on other sites
SMU's Crew 4 Posted April 2, 2013 Share Posted April 2, 2013 Yes, very strong tide run! The trick to coming in against the tide is stick as close as possible to the northern edge. From Smugglers Cove just get as close to the cliffs as you can and skirt around the edges of the channel from there. There's almost a back current going on in places, quite strange. That way you just have to cross across it closer to the Marina entrance if that's where you're headed. It does mean that heading from where you were you have to head more towards Heads, rather than the entrance in order to sneak down to avoid the super strong tidal run close to the entrance. You'll notice strong tidal runs around tuts as well. Hope you have a great day tomorrow! Link to post Share on other sites
banaari 27 Posted April 4, 2013 Author Share Posted April 4, 2013 Holed up in Tutukaka waiting out the weather. Parents have driven up to say hi and were delighted to be taken for a tiki-tour round the harbour even in the drizzle. Taken by the crew as we departed Kawau, Monday morning: Link to post Share on other sites
wheels 543 Posted April 4, 2013 Share Posted April 4, 2013 Pity I didn't know earlier. We came right past your door. Now in in the bay across from the refinery. Blowing a Gale. But it was not too bad out the front of Tutukaka. Came from Whangamumu today. Ran into the blow about 2hrs off The Bream Head. Link to post Share on other sites
Steve Pope 251 Posted April 4, 2013 Share Posted April 4, 2013 Next time North Allan have a look into Whangaruru and some of the bays south of there, there is a safe passage inside the Elizabeth reef. Some nice anchorages. Link to post Share on other sites
banaari 27 Posted April 5, 2013 Author Share Posted April 5, 2013 Spent another day holed up in Tutukaka. Elected to spend some of it conducting boat-handling exercises as if single-handed, while I still have the luxury of a safety person on board. All good; she's so small there's not a lot to handle, and of course there's that incredibly useful "azimuthing thruster" hanging off the tail... Aiming initially for Whangamumu tomorrow or possibly round into the BOI itself depending on progress. Link to post Share on other sites
banaari 27 Posted April 7, 2013 Author Share Posted April 7, 2013 Arrived in the Kerikeri Basin yesterday after an absolutely magic sail in from Oke Bay... last bit being downwind wing-and-wing straight up the inlet. Wee beastie is now parked on her home mooring; now the fun REALLY begins :) Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.