Wanted: Simrad SKT22/32 bulkhead connector for TP32

[Winter 42]

Im in need of a bulkhead connector for a TP32.  

[aywwa 0]

Which one? There are two types. The earlier one is 6 pin power, nmea0183 and corus navico pins, the other has 9pins, power, nmea0183 and Simrad nmea2000.

[Winter 42]

the newer one with 9pins and N2k.

[Winter 42]

Ordered one a day ago from Beacon, who had to work pretty hard to get Navico to admit that it was a real spare part. Apparently not anymore.

They sold me their last one for $200 🤬

[mattm 106]

6 hours ago, Winter said:

Ordered one a day ago from Beacon, who had to work pretty hard to get Navico to admit that it was a real spare part. Apparently not anymore.

They sold me their last one for $200 🤬

Ouch. 
 

I brought their ‘last one’ a couple of years ago too - that was dealing straight with Navico as I’m a Navico dealer. 
 

It does seem very strange these are not a common spare part, especially as the TP’s are a current item.  I might talk to them again.
 

I have subsequently found the plug, socket and cap from the original manufacturer, which are available as seperate items at comparatively very reasonable prices. They just need the power and NMEA wires soldered to them (could even do a devicenet plug rather than the simnet plug I suppose) - not hard. Sorry I didn’t see your post sooner. 

[Winter 42]

7 hours ago, mattm said:

I have subsequently found the plug, socket and cap from the original manufacturer, which are available as seperate items at comparatively very reasonable prices. They just need the power and NMEA wires soldered to them (could even do a devicenet plug rather than the simnet plug I suppose) - not hard. Sorry I didn’t see your post sooner. 

Might be good to get that info off you anyway, parts are probably available from RS?

[Clipper 362]

Not answering the question, but def related.  The 5(?) pin plugs for the Raymarine ST1000 and ST2000 can be bought from RS for 1/3 of the cost of through Raymarine.  They come from the same manufacturer.  I did it a few years ago, $25 v $75 from memory (and that $75 might have been a mates rate cost).

 

[Clipper 362]

I was a bit wrong (or the price has gone up). 6 pin and $42

https://nz.rs-online.com/web/p/industrial-circular-connectors/1473049/?relevancy-data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searchHistory={"enabled"%3Atrue}

[vesper1 3]

Hi Ihave a bulkhead connector if you still require one.

[aywwa 0]

If it falls thru I have one as well, 9pin and simrad cable. Never used.

[Island Time 1,286]

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

[Y88 5241 26]

10 hours ago, Island Time said:

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

IS I'd love to take this if no one else does. We have the bulkhead plug with the Simnet for connection to N2K, would this be the same one?

[Island Time 1,286]

2 hours ago, Y88 5241 said:

IS I'd love to take this if no one else does. We have the bulkhead plug with the Simnet for connection to N2K, would this be the same one?

Yep. I'll have a look for it today, and get back to you. Did you want the Micro C adapter as well?

[Y88 5241 26]

1 hour ago, Island Time said:

Yep. I'll have a look for it today, and get back to you. Did you want the Micro C adapter as well?

No thanks, already have the simnet - NK2 adapter, our existing socket is getting abit dodge for use

 

[Island Time 1,286]

Sorry, had a look, must have used it for someone else! Try aywwa as above

[Mooseman 0]

On 18/08/2021 at 4:36 PM, vesper1 said:

Hi Ihave a bulkhead connector if you still require one.

 

On 18/08/2021 at 8:59 PM, aywwa said:

If it falls thru I have one as well, 9pin and simrad cable. Never used.

Hello sailors!! I just bought a Simrad TP32 and I only got the tillerpilot, (no bulkhead connector, mounting socket or tiller pin). I would love to know how much you gentlemen would charge me to sell and ship the 9 pin bulkhead connector/cable?  Thanks!!

[Y88 5241 26]

On 19/08/2021 at 2:59 PM, aywwa said:

If it falls thru I have one as well, 9pin and simrad cable. Never used.

Do you still have this @aywwa by any chance?

 

[Cheap Transport 75]

On 19/08/2021 at 8:13 PM, Island Time said:

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

IT, i don't suppose you carry the cup and pin set for the TPs?

[Island Time 1,286]

I'll have a look, but it can be ordered as a spare part....

[JSK 0]

I need a 9 pin one too. Got a tp32 off trademe without realising I need the socket. So dissapointed. If all els fails I suppose I could cut the plug off and use some other plug and socket. Rather use genuine one though if anyone has one to sell?