Jump to content

Wanted: Simrad SKT22/32 bulkhead connector for TP32


Recommended Posts

6 hours ago, Winter said:

Ordered one a day ago from Beacon, who had to work pretty hard to get Navico to admit that it was a real spare part. Apparently not anymore.

They sold me their last one for $200 🤬

Ouch. 
 

I brought their ‘last one’ a couple of years ago too - that was dealing straight with Navico as I’m a Navico dealer. 
 

It does seem very strange these are not a common spare part, especially as the TP’s are a current item.  I might talk to them again.
 

I have subsequently found the plug, socket and cap from the original manufacturer, which are available as seperate items at comparatively very reasonable prices. They just need the power and NMEA wires soldered to them (could even do a devicenet plug rather than the simnet plug I suppose) - not hard. Sorry I didn’t see your post sooner. 

Link to post
Share on other sites
7 hours ago, mattm said:

I have subsequently found the plug, socket and cap from the original manufacturer, which are available as seperate items at comparatively very reasonable prices. They just need the power and NMEA wires soldered to them (could even do a devicenet plug rather than the simnet plug I suppose) - not hard. Sorry I didn’t see your post sooner. 

Might be good to get that info off you anyway, parts are probably available from RS?

Link to post
Share on other sites

Not answering the question, but def related.  The 5(?) pin plugs for the Raymarine ST1000 and ST2000 can be bought from RS for 1/3 of the cost of through Raymarine.  They come from the same manufacturer.  I did it a few years ago, $25 v $75 from memory (and that $75 might have been a mates rate cost).

 

Link to post
Share on other sites

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

  • Upvote 1
Link to post
Share on other sites
10 hours ago, Island Time said:

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

IS I'd love to take this if no one else does. We have the bulkhead plug with the Simnet for connection to N2K, would this be the same one?

Link to post
Share on other sites
2 hours ago, Y88 5241 said:

IS I'd love to take this if no one else does. We have the bulkhead plug with the Simnet for connection to N2K, would this be the same one?

Yep. I'll have a look for it today, and get back to you. Did you want the Micro C adapter as well?

Link to post
Share on other sites
1 hour ago, Island Time said:

Yep. I'll have a look for it today, and get back to you. Did you want the Micro C adapter as well?

No thanks, already have the simnet - NK2 adapter, our existing socket is getting abit dodge for use

 

Link to post
Share on other sites
On 18/08/2021 at 4:36 PM, vesper1 said:

Hi Ihave a bulkhead connector if you still require one.

 

On 18/08/2021 at 8:59 PM, aywwa said:

If it falls thru I have one as well, 9pin and simrad cable. Never used.

Hello sailors!! I just bought a Simrad TP32 and I only got the tillerpilot, (no bulkhead connector, mounting socket or tiller pin). I would love to know how much you gentlemen would charge me to sell and ship the 9 pin bulkhead connector/cable?  Thanks!!

Link to post
Share on other sites
On 19/08/2021 at 8:13 PM, Island Time said:

I'm a B&G (Navico) Tech Dealer. I'm pretty sure  have one in my odds and ends you can have free (collect at Gulf Harbour) or for courier cost if you still need it. Just let me know...

IT, i don't suppose you carry the cup and pin set for the TPs?

Link to post
Share on other sites

I need a 9 pin one too. Got a tp32 off trademe without realising I need the socket. So dissapointed. If all els fails I suppose I could cut the plug off and use some other plug and socket. Rather use genuine one though if anyone has one to sell? 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...