Funny thing- welded up homemade Bruce while at Marsden pt. Towed behind tractor in wet sand, dry sand- she just skated along on top. Thought dang it, got galvanised and has provided faultless service ever since. Best ever.
Have had a Veon for 2yrs and then put DVD in back to front which was a bigger mistake than I thought it would be. Had to strip apart and parts left over so DVD kaput now. Interestingly the bare steel chassis etc had no rust and as good as new.
Suspend a couple of lead weights in tandem on inside from the top. Positioned so they are dangling in the outlet. How would that go to prevent not draining?
Agree with JB but to minimise the expense you can do all that yourself with a cut-off disc (& safety glasses) Drilling you might need to use a guy with a drillpress.
Thanks-solar panel mount. Using 1" canopy fittings with grub screws. Haven't welded anything.Now do you drill a wee hole/big hole or no hole at all for the grubscrew point?
One inch 316 tubing. To bolt to it I can flatten the last 2 inch and drill thru it, or can drill thru it without flattening and use a longer bolt. Any preference?
Nowadays I have a small plastic box containing side cutters
6" crescent
Stubby screwdriver with diff bits
Pliers
Couple of fav screwdrivers
" " odds/sods
Do 90% of jobs with this