Jump to content

Sealing Sheet Tracks

Recommended Posts

1 hour ago, Sail Rock said:

Same here. Get someone to hold the screw in place with a screwdriver to prevent it turning and breaking its bond with the sealant, while you tighten the nut from below.

You have had success with this method Sail Rock? Currently in the process of doing the first track at the moment using Sika 291. Cheers.

Link to post
Share on other sites
  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Here you go : https://www.tradeproducts.co.nz/product/butyl-lap-tape-white-4mm/

I did the same as Fish using Sika 291, the trick is too do the last tighten after it’s hardened but before it’s fully cured. And tighten the nuts not the screw of course

Yes, 291 is the stuff, and 180S is spot on, and in better detail than me. It is definitely a 2 person job. Firstly to lay down the sika and place the track on it, then to tighten the nuts while someon

Posted Images

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...