Jump to content

This Weekend's Achievements


Recommended Posts

  • Replies 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Not this weekend but over the last month i have been doing something new. I had a delivery planned Tahiti to Auckland but it failed to materialize. Angela had gone to visit her mum in Florida so

Got 10 boats towed back into the environment before 10:30 this morning, waited until tide came in, floated off the cradle and went to the mooring only to find it had become an ecosystem all of its own

Video, but lacking actual sailing stuff.... https://youtu.be/t3hOELUp8Bs   Newbie Mr Poms helming at 11 knts (+ spaghetti)   Cruisy at anchor shot   weathered a Summer blow

Posted Images

I successfully managed to change a head light bulb in a late model European car.

Anyone wondering why this is worthy of positing as a weekend's achievement clearly hasn't had the pleasure of completing such an apparently simple task. Damn near physically impossible. A sense of achievement equivalent to sailing around the country with only one mate.

European cars are clearly not designed for european male hands. And why do they have layer upon layer of apparently pointless plastic covers, screens and shrouds? All they do is give the impression the engine is too complex to touch, and hide the bit you are actually trying to find.

 

Bring back my old HJ Holden. I could unbolt the bonnet and stand beside the engine with one leg either side of the front suspension, and change the head gasket in an afternoon. Could even change the whole engine in a weekend, and consequently carry the old one around in the boot for spare parts... didn't even need a computer to tell me what the engine fault was!

Link to post
Share on other sites

OK, so it took a few extra days to get any photos.

 

Here's the "big" day, when the Zürich Water Police surveyed the boat and made their assessment as to its seaworthiness. Using a crude formula they determined the number of people it's allowed to have on board when sailing (anyone care to guess?) - formula uses only beam and length (1.42 x 3.85m). We're now registered and allowed to use the boat, but I have to make a builder's plate with hull number etc... (lol).

 

By my calculations using straight line interpolation between the sections, it will take 475kg to reduce freeboard to 25cm, and there's 142L of sealed tankage under the main cockpit seats. 

 

We stepped the mast and they actually tipped it right over until it flooded. But it sat very high, taking on probably less than 150L of water when they allowed it to right. All of that was in the forward section between the centreboard and the forward thwart. 

 

Only in Switzerland does one use a crane to launch a 65kg boat...

gallery_123_40_1247027.jpg

 

gallery_123_40_1040133.jpg

Link to post
Share on other sites
  • 4 weeks later...

Nothing as exciting as that...

 

I bought the boat about a year ago straight after a so called boatbuilder had redone the keel (and charged the previous owners quite a bit of money to replace keelbolts etc).

 

Turns out they had no clue about what they were doing (look out aucklanders if you are getting keel work done)

 

Keel was faired pretty similar to what a 2 year old might make out Plasticine, warped and hollowed out with a trailing edge curved off to port (probably why we were 4 degrees better on one tack and the boat rounded up at random occassionally.

 

So the plan was to refair the keel but once sanded back we noticed the dreaded red weeping. Turns out the trailing edge had been sanded through (probably trying to get it remotely fair) and then water had seeped in and run along the base plate.

 

Fortunately the deadwood is solid cedar not ply and there was a filler "Dam" so the water didn't seep up any higher. given saltwater in oxygen free environment are not a great idea we took out the section and now the pros are involved fixing it. Guessing shape some high density foam or wood then glass it in.

 

Pretty gutting but very pleased I found it now!

 

Interestingly there is a cavity with a whole bunch of lead shavings and some balck tar type stuff in it. Only around 5kg of shavings but random to find.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...