Kick Ass
-
Content Count
360 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Everything posted by Kick Ass
-
But on the positive side it will look the part!
-
Wouldn’t be a Ross boat by any chance?....
-
Recommended Canvas Dodger & Bimini Suppliers (Cockpit enclosure)
Kick Ass replied to Farr44's topic in MarineTalk
Just noticed your in Marlborough, Karl is based in Auckland. -
Recommended Canvas Dodger & Bimini Suppliers (Cockpit enclosure)
Kick Ass replied to Farr44's topic in MarineTalk
Karl from The Canvas Works. Can recommend him highly, he has done a lot of work for me privately and through work. Listens to what you want and has good advice. https://www.thecanvasworks.co.nz/ -
Best to go direct, you need to speak to a guy called Adam Wickes and he does all the custom stuff. He will come and pattern your boat, send patterns away then it gets drawn up and cut on a router.
-
It’s not cheap, to give you an idea a 2100 Stabicraft costs $1500 and that’s at my cost and we do big volumes of the ultralon products.
-
It is ultralon foam, a lot of race boats are fitting it in their cockpits. https://www.ultralonfoam.com/products/u-dek-deck-treads Cool product, we install this on boats at work fur customers and you can customise it however you want
-
Expect to go up wind the whole way and you may be surprised!
-
We’ll give that ago in the 250 and see how we get on haha
-
Have found some Ronstan ones that should upset the bank account to much...
-
Ours has acetal sleeves that have been machined up. I would avoid glueing as you may want to get the ends off one day for servicing
-
Anyone have 1 of these kicking around, boat only came with 1 so need another so we can tack...
-
Could almost have our own division!
-
What sort of price would they pay? I’m about to remove all the raymarine gear out of Kick to replace with B&G
-
Why not use the ais for B&G?
-
https://www.sail-world.com/news/209405/Cape-40-Mr-Kite-is-for-sale
-
Elan is much heavier than 2800kg
-
They are pretty good, make sure you get the external antenna. Good feature is you can set it up to send position reports to a desired phone # at whatever intervals you desire.
-
Kick is in!
-
Same with us, Jobs lists are already created! And slowly ticking them off.
-
https://www.absolutemarine.co.nz/stanchion-s-s-600mm No base welded on so not much to go wrong, Booboo and Damon used these and had their own base laser cut and welded
-
Absolute marine should have what you are after
-
Fineline has just developed this and believe Motorboat ii is the first boat to have this fitted to. Was developed specifically for lifelines.
-
Well it just happened haha. Thanks to this crew site i have saved lots of money over the years and had alot of advice.
-
Rebuilt by muzzas for $160 which included a new gasket. Very good service and quick.