Atom Ant 0 Posted March 26, 2011 Share Posted March 26, 2011 Love it! Quote Link to post Share on other sites
w44vi 17 Posted March 27, 2011 Share Posted March 27, 2011 stunning Quote Link to post Share on other sites
rigger 47 Posted March 28, 2011 Share Posted March 28, 2011 from this evening Quote Link to post Share on other sites
rigger 47 Posted March 28, 2011 Share Posted March 28, 2011 . Quote Link to post Share on other sites
Guest Posted March 28, 2011 Share Posted March 28, 2011 That looks magnificent. Only one ugly thing left to go now. Do we have any plastic surgeons in the house? Quote Link to post Share on other sites
Atom Ant 0 Posted March 28, 2011 Share Posted March 28, 2011 Awesome Tim! Quote Link to post Share on other sites
TimW 1 Posted March 29, 2011 Share Posted March 29, 2011 Thank you very much to the 10 helpers we had last night to put the Wolf back together. I am very grateful for all of the assistance we have received over the past few months. It will be great to finally get the Wolf back on the water and sailing. Shortly I will be putting in our entry for the Squaddy winter series which starts on April 30th. Quote Link to post Share on other sites
w44vi 17 Posted March 29, 2011 Share Posted March 29, 2011 Well done! You must have a real sense of achievement, and relief to be finally just about back in the water Quote Link to post Share on other sites
smithy09 50 Posted March 31, 2011 Share Posted March 31, 2011 Nice work Tim and great thread and updates. Thanks! End result looks stunning. Quote Link to post Share on other sites
bushman 12 Posted April 1, 2011 Share Posted April 1, 2011 wow .......... that looks awesome , congratulations from the Great Far North , I better not roller on me paint now! ..... better to get one of those vacuum cleaner sprayers instead eh ! Quote Link to post Share on other sites
Guest Posted April 2, 2011 Share Posted April 2, 2011 dont lie bushman you'll still roll on that navy gray Quote Link to post Share on other sites
TimW 1 Posted April 3, 2011 Share Posted April 3, 2011 WOW ! Jason Sager has just finished the antifouling. He used Micron 66 and gave the Middle hull an extra lick as well as two coats on the amas. Jason, Thank you very much ! You are a true Multihull legend (talking about your Antifoul Painting here, Jase, not your sailing ability!) Quote Link to post Share on other sites
bushman 12 Posted April 3, 2011 Share Posted April 3, 2011 was he stoned he works best like that Quote Link to post Share on other sites
TimW 1 Posted April 3, 2011 Share Posted April 3, 2011 If you get the chance, check out the surface finish of the Antifoul. don't try to tell me you could get it that smooth with a foam roller. It is just fantastic, thank you so much Jason, the finish is awesome! Quote Link to post Share on other sites
Marshy 30 Posted April 3, 2011 Share Posted April 3, 2011 I agree Tim! The finish is awesome! No way can you roll anywhere near as smooth as that boy can spray. Good work Jason! Boat looks awesome Tim Quote Link to post Share on other sites
TimW 1 Posted April 4, 2011 Share Posted April 4, 2011 New boom needs a little bit more work. Its not quite as light as its disastrous predecessor but its just so much stronger and stiffer due to some well placed High Modulus Carbon.. this one is not going to break ! Quote Link to post Share on other sites
Bad Kitty 252 Posted April 4, 2011 Share Posted April 4, 2011 Aaaaaaaaaaarh, agonising boom jealousy strikes deep into the guts! Quote Link to post Share on other sites
Marshy 30 Posted April 4, 2011 Share Posted April 4, 2011 I reckon!! That looks cool Tim, whats the section before you put the flat top on it? Looks ideal for the SR Quote Link to post Share on other sites
Guest Posted April 12, 2011 Share Posted April 12, 2011 Hey Tim when's the parteeeeeeeeee.The tga boyz are keen to come up again, apart from sleeping in ute out side the yacht club and getting kicked out of nite clubs ha ha ha good nite Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.