Y88 5241
Members-
Content Count
162 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Everything posted by Y88 5241
-
I don't know where you are but we got ours from Beacon Marine
-
Thanks Frank, have been in contact with Hauraki this morning with a booking. Yes weather etc plays an issue which is understandable. I suspect we are more likely been delayed due to not many jobs in the upper harbour!
-
Bad timing with the level 3 shut down this evening, but can anyone recommend a mooring service contractor in Auckland (Upper harbour) by any chance? Find out this evening after booking in a mooring service in January 2020 for a mooring due by the 1st September 2020 that the contractor is still 10-12 weeks away from getting to our mooring with no previous notice. Obviously not going to get a mooring contractor in time now, however need to get it done ASAP. Thanks in advance
-
It come off it’s mooring about 2 months ago and been sitting on the bottom off Kauri point since
-
Wanting to make this removable but leave the wiring loom in the boat. Is it ok to cut and solder a connection in the middle of the cable? What sort of plug would you use? It’s a 9pin Lowerance/Simrad plug
-
What size chain do you recommend for a Young 88 primary anchor?
-
They have a physical store as well
-
Where can I pick it up from?
-
What is recommended for a anchor warp on a Young88? 12mm 3 strand or 12mm 8 strand
-
Might want to strengthen the gudgens as they usually fail after a few sails in decent breeze
-
Any recommended stainless welders in Auckland? Need to get some stanchions repairs. Will remove from the boat and deliver. 6x posts
-
No was V5 and bit different to how you describe it
-
I know ES has a new paint job but maybe not a good return of investment for the current owner in the current market
-
We picked up our Y88 for 22k in July last year started at $59k!
-
All good except those who brought a brand new raft for the coastal last year thinking it would be good for a few years to come, and now find its worthless as who needs a cat3 raft now! Personally I’m against the idea of removing the raft requirements, whilst it’s never been used it, if a boat was to sink and a live lost explaining the rationale behind removing the requirement may be hard as ‘to get more entries’ probably won’t cut it
-
Looks like two barges to me from the photo
-
We are up Hobsonvillle way and total cost works out to be 5-600 per year Over three years. But we change everything at the three year service
-
Coastal or offshore? I have a cat2 spec one
-
All working ok but upgraded system. Good as a spare for someone?
-
Is anyone interest in 2x Barlow Masport 15 single speed winches. Coming off a cabin top of a Young 88 due to upgrade open to offers!
-
I have a 2006 Mercury 2.5hp 2-stroke for sale. Never used except for initial tank run at dealer and last week also at dealer. Has been stored for the last few years in my grandfathers garage. Couple small scratches on bottom of leg but otherwise new. Will throw in the throttle valve upgrade to turn it into a 3.3hp. Stored at westhaven Asking $650
-
I have the CFX 40 as well and runs nicely on 12v no issues we have a solar panel topping up battery as also running secondary build in fridge. We brought a Dometic/Waeco chilly bin as well, keeps salt ice cold 5 days so far with this heatwave
-
Luckily the tide was pulling me off but dead slack low tide, plenty of shellfish etc makes it interesting. Saved a trip back to Matitia
-
Yes with a Spinlock, what you want to know